日本三级全黄三级a,成αv人,久久精品国产一区二区三区日韩

Support

	Mr Chen
	0755-28685967
	0755-28683673
	15013555541
	1990254019
	hangkiy@zjsc.ltd
	12th Floor, Block A, Mingde Building, Longcheng Street, Longgang District, Shenzhen

Hot Search:

You are here：Home >> Support >> FAQ

Q: ZJSC-P10 simple debugging method:: ZJSC-P10 A Turn on-power supply Long press for 3-5 seconds B select C adjustment D Confirm Adjustment method 1. Press the D key twice to enter the system 2. Press C key to move to-sensitivity adjustment 3. Press D to confirm and enter-press D to change 4. Press C to move the position to the next digit-press D to change 5. Press D to save and exit The higher the number, the higher the sensitivity Overall -1 strong; 50 weak

Q: Simple debugging method for ZLSC-P9 security gate: 1. Confirm key once 2. After selecting the key once, it will appear as 1234 3. Confirm key 2 times 4. Select the key once (has entered the system) 5. L001 means zone 1, and the bottom row is sensitivity 6. Sensitivity adjustment 7. Adjust the key once (the number of digits can be switched) 8. Confirm key once (the size of the number can be changed) 9. Select key once (used to switch location) 10. L008: overall sensitivity 1 high, 50 low 11. After adjusting the selection to D001, press the confirm key once...

Q: Building a globally influential international science and technology innovation center...: Innovation is the first driving force for development. To implement the innovation-driven development strategy, we must firmly grasp the "bovine nose" of technological innovation. The planning outline proposes to build Guangdong, Hong Kong, Macau and Dawan District into a “global international innovation center with global influence”, which reflects the profound insight into the high-quality development momentum of the new era. It is based on the overall development of the country and the foundation, reality and future of Guangdong, Hong Kong and Macao. The scientific deployment made. The three regions have outstanding research and development and transformation capabilities, and have a number of universities, research institutes, high-tech enterprises and national science projects with important influences in the country and the world. The innovative elements are attractive and have good construction of international science and technology innovation centers. basis....

Q: Inflationary pressures worth noting in 2018 The global economy will be the strongest in seven years...: According to the Institute of Supply Management (ISM), the U.S. manufacturing expansion in December was the fastest in three months in December, breaking records due to the increase in orders and production volume, the strongest year for manufacturing since 2004. Manufacturing industries around the world say they find it increasingly difficult to keep pace with demand, which could force them to raise prices as this year‘s global economy appears to be the strongest since 2011.

Q: Will innovation appear in the cloud, on the edge or elsewhere?: Businesses need to be proactive, especially with the EU‘s General Data Protection Regulations (GDPRs), which take effect five months later. To ensure that retailers, government agencies, emergency services, and other organizations do not violate regulatory standards, one needs to consider whether facial recognition, license plate recognition, vehicle sensors and other technologies can meet the requirements and requirements of the GDPR.

Q: 2017 Smart Manufacturing Pilot Demonstration Project Review and Outlook 2018: In the past three years, with the vigorous promotion by the Ministry of Industry and Information Technology and the Industrial Internet Pilot Demonstration Project including Manufacturing Cloud Platform, which was stripped out by MIIT in 2016, the number of pilot projects for smart manufacturing has reached and exceeded the number of pilot projects conducted by MIIT Huaijin Peng in 2015, To 2018 to cultivate 100 smart manufacturing pilot demonstration enterprise "goal.

Q: Tactile and self-healing robot is becoming a reality: Recently, researchers at the University of Glasgow in the United Kingdom used graphene to develop an electronic robot skin that is more tactile than human hands. It is reported that the newly developed skin of the robot is essentially a tactile sensor, scientists will use it to create more lightweight prostheses, and the surface of the skin feels softer, more natural robot.